Just removing some things that are cluttering up the source tree.

1 files changed, 0 insertions, 411 deletions

diff --git a/src/old/connection.h b/src/old/connection.h
deleted file mode 100644
index 0e991c7..0000000
--- a/src/old/connection.h
+++ /dev/null
@@ -1,411 +0,0 @@
-/**\file
- * Contains the Connection class.
- *@author Mike Buland
- */
-
-#ifndef CONNECTION_H
-#define CONNECTION_H
-
-#include "multilog.h"
-#include "flexbuf.h"
-#include "protocol.h"
-
-/** Represents a single connection on a network.  While these connections
-  * may be treated more or less just like files, occasionally problems arise
-  * when writing data at any time you feel like.  Therefore you run all your
-  * data through a Connection, which buffers all data and makes sure no
-  * buffers are exceeded and nothing inappropriate for the recipient of the
-  * data is sent.
-  *@author Mike Buland
-  */
-class Connection
-{
-public:
-        /**
-         * Construct a blank and non-connected Connection.  The created object is
-         * not yet connected to anything, and most of the functions except open are
-         * unusable.
-         */
-        Connection();
-        
-        /**
-         * Destroy the connection, clean up all pending data requests and close the
-         * contained socket.  This does not send out pending data, especially since
-         * such an operation could take considerable time, depending on the pending
-         * data and state of the receiving end.
-         */
-        virtual ~Connection();
-
-        /**
-         * Open a connection to a remote server.  This sets up this connection as
-         * a client instead of a server and does all of the work that needs to be
-         * done to actually open an INET_AF connection, which is a lot of work.
-         *@param sAddr The address to connect to.  This can be in any format
-         * normally understood by your system to be an address, ip, domain name,
-         * etc.
-         *@param nPort The port number to connect to on the remote server.
-         *@returns True if the connection was successful and everything is setup,
-         * false if there were any of a dozen errors and the connection is not set.
-         *@todo Make this function add log entries to a standard MultiLog if
-         * something goes wrong.
-         */
-        bool open( const char *sAddr, int nPort, int nSec=30 );
-
-        void ensureCapacity( int nSize );
-
-        /** Append the given data to the output.  The data is presumed to be null
-          * terminated.  To put binary data into the stream, use the other
-          * appendOutput function.  This should be the only method used to
-          * communicate with the socket.
-          *@param lpOutput The data to add to the output queue.
-          *@param nSize How much data is in the lpOutput buffer.  If this value
-          * is -1 then the program treats lpOutput as a null-terminated string.
-          *@returns True if everything is ok, false otherwise.
-          */
-        bool appendOutput( const char *lpOutput, int nSize=-1 );
-
-        /**
-         * Append the character to the output.
-         *@param lOutput The character to add to the output queue.
-         *@returns True if everything is ok, false otherwise.
-         */
-        bool appendOutput( const char lOutput );
-
-        /**
-         * Append the short to the output.
-         *@param lOutput The short to add to the output queue.
-         *@returns True if everything is ok, false otherwise.
-         */
-        bool appendOutput( const short lOutput );
-
-        /**
-         * Append the int to the output.
-         *@param lOutput The int to add to the output queue.
-         *@returns True if everything is ok, false otherwise.
-         */
-        bool appendOutput( const int lOutput );
-
-        /**
-         * Append the long to the output.
-         *@param lOutput The long to add to the output queue.
-         *@returns True if everything is ok, false otherwise.
-         */
-        bool appendOutput( const long lOutput );
-
-        /**
-         * Append the float to the output.
-         *@param lOutput The float to add to the output queue.
-         *@returns True if everything is ok, false otherwise.
-         */
-        bool appendOutput( const float lOutput );
-
-        /**
-         * Append the double to the output.
-         *@param lOutput The double to add to the output queue.
-         *@returns True if everything is ok, false otherwise.
-         */
-        bool appendOutput( const double lOutput );
-
-        /**
-         * Append the unsigned char to the output.
-         *@param lOutput The unsigned char to add to the output queue.
-         *@returns True if everything is ok, false otherwise.
-         */
-        bool appendOutput( const unsigned char lOutput );
-
-        /**
-         * Append the unsigned short to the output.
-         *@param lOutput The unsigned short to add to the output queue.
-         *@returns True if everything is ok, false otherwise.
-         */
-        bool appendOutput( const unsigned short lOutput );
-
-        /**
-         * Append the unsigned int to the output.
-         *@param lOutput The unsigned int to add to the output queue.
-         *@returns True if everything is ok, false otherwise.
-         */
-        bool appendOutput( const unsigned int lOutput );
-
-        /**
-         * Append the unsigned long to the output.
-         *@param lOutput The unsigned long to add to the output queue.
-         *@returns True if everything is ok, false otherwise.
-         */
-        bool appendOutput( const unsigned long lOutput );
-
-        /**
-         * Writes all input data in the buffer in a dual-view ascii and hex display
-         * to a file.  There are a number of options that also help with debugging.
-         *@param lpPrefix Text to be added to the begining of every line written
-         * out.  The default is a blank string.
-         *@param fh The file to write the data to in text mode.  This is stdout by
-         * default, but could be any already open file handle.
-         *@param nBytesMax The maximum number of bytes to write to the output.  The
-         * amount of data can be overwhelming sometimes, so you can limit it.  The
-         * default value is -1, which is also unlimited.
-         */
-        void printInputDebug( const char *lpPrefix="", FILE *fh=stdout, int nBytesMax=-1 );
-
-        /**
-         * Writes all output data in the buffer in a dual-view ascii and hex display
-         * to a file.  There are a number of options that also help with debugging.
-         *@param lpPrefix Text to be added to the begining of every line written
-         * out.  The default is a blank string.
-         *@param fh The file to write the data to in text mode.  This is stdout by
-         * default, but could be any already open file handle.
-         *@param nBytesMax The maximum number of bytes to write to the output.  The
-         * amount of data can be overwhelming sometimes, so you can limit it.  The
-         * default value is -1, which is also unlimited.
-         */
-        void printOutputDebug( const char *lpPrefix="", FILE *fh=stdout, int nBytesMax=-1 );
-
-        /**
-         * This is the low-level generic function that is called by both
-         * printInputDebug and printOutputDebug.  It works effectively just like
-         * both of them, except that you can give it a raw pointer to the data to
-         * print out.  This probably doesn't belong in this class, but this was
-         * where I was when I needed it.
-         *@param pData A pointer to the data to write.  This is not treated as a
-         * null terminated string, so make sure that the nDataLen param is set
-         * properly.
-         *@param nDataLen The number of bytes that are in pData and that you want to
-         * see.
-         *@param lpName The name of the data, this is used in the header where it
-         * says "Displaying nnn bytes of <lpName>."  A good example would be input
-         * or output.
-         *@param lpPrefix Text to put before every line output.  This just makes it
-         * easier to tell large blocks apart in the output.
-         *@param fh The file handle to write all data to.
-         *@param nBytesMax The maximum number of bytes.  This parameter is stupid.
-         * If it is set to -1, then nDataLen is used, otherwise the smaller value is
-         * used as the number of bytes to output.
-         *@todo Put this function somewhere more deserving.
-         *@todo Remove the nBytesMax param, we need that in the other functions,
-         * not this one!
-         */
-        void printDataDebug( const unsigned char *pData, long nDataLen, const char *lpName, const char *lpPrefix, FILE *fh, int nBytesMax );
-
-        /** Append the given data to the input.  The data is presumed to be null
-          * terminated.  To put binary data into the stream, use the other
-          * appendInput function.  This is mainly used by internal routines.
-          *@param lpInput The data to add to the input queue.
-          *@param nSize How much data is in the lpInput buffer.  If this value
-          * is -1 then the program treats lpOutput as a null-terminated string.
-          *@returns True if everything is ok, false otherwise.
-          */
-        bool appendInput( const char *lpInput, int nSize=-1 );
-
-        /** Searches through the current pending input for a certain character.
-          * This is useful for finding out where exactly the end of a line is, for
-          * example, to see if a command has been entered yet.
-          *@param cTarget The character to search for.
-          *@returns The position of the target relative to the begining of the input
-          * or -1 if the target wasn't found.
-          */
-        int scanInputFor( char cTarget );
-
-        /** Gets a pointer to the output buffer.  This is mainly used by internal
-          * routines, and is cleared every click when data is sent out again.
-          *@returns A pointer to the buffer holding the pending output data.
-          */
-        const char *getOutput();
-
-        /** Gets a pointer to the start of the input buffer's active data
-          * section.  Use this to gain access to the input you need to do
-          * your job.
-          *@returns A pointer to the data in the input buffer.  Do not delete this.
-          */
-        const char *getInput();
-
-        /** Clears all pending output, this is mainly just used internally.
-          *@returns True if operation was a success, otherwise false.
-          */
-        bool clearOutput();
-
-        /** Clears all pending input, weather it's been used or not.  Please
-          * refrain from calling this during normal operation, use usedInput
-          * instead, it's much safer.
-          *@returns True if the operation was a success, false otherwise.
-          */
-        bool clearInput();
-
-        /** Sets the socket that should be used internally.
-          *@param nNewSocket The new socket to work with.
-          */
-        void setSocket( int nNewSocket );
-
-        /** Gets the handle (number) of the working socket.  This can be a
-          * dangerous function to call, please refrain from calling it directly
-          * if any alternative can be found.
-          *@returns The number of the working socket.
-          */
-        int getSocket();
-
-        /** Determines if the connection is still active.
-          *@returns True if the connection is active, false otherwise.
-          */
-        bool isActive();
-
-        /** Clears all buffers and sets up the connection to be reused.
-          * Does not actually close the socket, that's handled by the
-          * ConnectionManager
-          */
-        void close();
-
-        /** Opens a socket.  Really just sets up the connection for use since
-          * the socket itself was created and opened by the ConnectionManager.
-          * This also calls setSocket so you don't have to.
-          *@param nNewSocket The socket to assosiate with.
-          */
-        bool open( int nNewSocket );
-
-        /**
-         * Reads all pending input from the connection.  If this is called outside
-         * of the ConnectionManager it will usually block indefinately waiting for
-         * new data.  The only way to change this behaviour is to modify the socket
-         * low-level when you connect it manually, or, preferably use the other
-         * readInput function to control blocking time.
-         *@returns True socket is still connected, otherwise false.
-         */
-        int readInput();
-
-        /** 
-         * Reads all pending input from the connection, blocking up to nSec
-         * seconds and nUSec micro-seconds for the data.  This uses select to
-         * simulate blocking, but has the same effect as standard io blocking.
-         * If you don't want to block, just set both values to zero.  The back
-         * parameters are optional, set to null to not use them.  The variables
-         * you pass in through the back parameters will contain the remaining
-         * time if data arrived before the max timeout was reached.
-         *@param nSec Max seconds to wait.
-         *@param nUSec Max micro-seconds to wait.
-         *@param pnSecBack The number of seconds remaining.
-         *@param pnUSecBack The number of micro-seconds remaining.
-         */
-        bool readInput( int nSec, int nUSec, int *pnSecBack=NULL, int *pnUSecBack=NULL );
-
-        /**
-         * Waits until at least nBytesIn are read into the input buffer and ready
-         * to be used.  Wait at most nSec seconds plus nUSec micro seconds.
-         * If the timeout is exceeded, this function throws an exception.  If this
-         * function returns normally, you are guranteed to have at least nBytesIn
-         * bytes in your input buffer.
-         *@param nBytesIn Number of bytes to read.
-         *@param nSec The max seconds to wait.
-         *@param sUSec The max microseconds to wait.
-         */
-        void waitForInput( int nBytesIn, int nSec, int nUSec );
-
-        /** Writes some data that is pending to the socket.
-          *@returns True if all data was written succesfully, false otherwise.
-          */
-        bool writeOutput();
-
-        /**
-         * Writes all data that is pending on the socekt.
-         */
-        bool writeAllOutput();
-
-        /** Determines if the connection has output waiting to go out.
-          *@returns true if there is pending output, otherwise false.
-          */
-        bool hasOutput();
-
-        /** Sets internal flags so that this connection will be deleted next
-          * time through the ConnectionManager.
-          */
-        void disconnect();
-
-        /** Determines if this connection is ready to be disconnected or not.
-          *@returns True if it is time to disconnect, false if it isn't.
-          */
-        bool needDisconnect();
-
-        /** Tells the caller if there is pending input waiting to be processed.
-          *@returns True if there is pending input that has not been used, returns
-          * false if there isn't.
-          */
-        bool hasInput();
-
-        /** Removes bytes from the begining of the input queue.  Use this after
-          * getting the input and processing as much as you need to.
-          *@param nAmount The number of bytes used.
-          *@returns true if the update was successful, otherwise false.
-          */
-        bool usedInput( int nAmount );
-
-        /** Sets the protocol to be used by this connection.  All data in and out
-          * passes through the protocol object, which may process that data to
-          * filter out and process any special messages that may have been
-          * included.  Everything that isn't processed can be accessed in the
-          * standard method.
-          *@param pNewProtocol A pointer to a protocol object that you want to
-          * use.
-          */
-        void setProtocol( class Protocol *pNewProtocol );
-
-        /** Gets the number of bytes that are waiting in the input queue, the data
-          * that has yet to be processed.
-          *@returns The number of bytes in the input queue.
-          */
-        int getInputAmnt();
-
-        /** Gets the number of bytes that are waiting in the output queue, the data
-          * that has yet to be sent to the connected socket.
-          *@returns The number of bytes in the input queue.
-          */
-        int getOutputAmnt();
-        
-        /** Gets a pointer to the protocol that is attatched to this connection
-          * object.  This is useful to set modes, and send special commands in
-          * addition to the standard raw data reads and writes that are normally
-          * permitted.  In fact, in everything besides a raw telnet protocol all
-          * data should be sent through the protocol and not the connection object.
-          *@returns A pointer to the Protocol assosiated with this connection.
-          */
-        class Protocol *getProtocol();
-
-private:
-        /**
-         * A buffer to keep data read from the socket in.  This is filled in by
-         * the function readInput, which is automatically called by the
-         * ConnectionManager whenever new data is ready.
-         */
-        FlexBuf xInputBuf;
-
-        /**
-         * A buffer to keep data that should be sent to the socket.  This is filled
-         * in by using the AppendOutput functions and is sent to the socket using
-         * the writeOutput function, which is automatically called every cycle by
-         * the ConnectionManager when there is pending data.
-         */
-        FlexBuf xOutputBuf;
-
-        /**
-         * The socket that the user is connected to.  This is not the same as the
-         * socket number of the listening socket, this is the unique socket on the
-         * system that the data is coming to.
-         */
-        int nSocket;
-
-        /**
-         * True=active connection, False=connection lost
-         */
-        bool bActive;
-
-        /**
-         * True=disconnect next cycle (after data is transmitted), Flse=keep going.
-         */
-        bool bDisconnectMe;
-
-        /**
-         * A pointer to a protocol handler that can automatically process the data
-         * in the buffers.  This is optional if you use the connections on your own
-         * but reccomended if you use this with the rest of the ConnectionManager
-         * system.
-         */
-        class Protocol *pProtocol;
-};
-
-#endif